Enable

SCPI Command :

CONFigure:WLAN:MEASurement<Instance>:MEValuation:LIMit:SFLatness:POFDm:BW<bandwidth>:ENABle

class EnableCls

Enable commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(bandwidthB=BandwidthB.Default) → bool

# SCPI: CONFigure:WLAN:MEASurement<Instance>:MEValuation:LIMit:SFLatness:POFDm:BW<bandwidth>:ENABle
value: bool = driver.configure.multiEval.limit.spectrFlatness.pofdm.bw.enable.get(bandwidthB = repcap.BandwidthB.Default)

Enables or disables the spectrum flatness limit check for 802.11p OFDM signals with the specified <bandwidth>.

param bandwidthB:

optional repeated capability selector. Default value: Bw5 (settable in the interface ‘Bw’)

return:

enable: OFF | ON

set(enable: bool, bandwidthB=BandwidthB.Default) → None

# SCPI: CONFigure:WLAN:MEASurement<Instance>:MEValuation:LIMit:SFLatness:POFDm:BW<bandwidth>:ENABle
driver.configure.multiEval.limit.spectrFlatness.pofdm.bw.enable.set(enable = False, bandwidthB = repcap.BandwidthB.Default)

Enables or disables the spectrum flatness limit check for 802.11p OFDM signals with the specified <bandwidth>.

param enable:

OFF | ON

param bandwidthB:

optional repeated capability selector. Default value: Bw5 (settable in the interface ‘Bw’)