Antenna<Antenna>

RepCap Settings

# Range: Nr1 .. Nr8
rc = driver.configure.rfSettings.antenna.repcap_antenna_get()
driver.configure.rfSettings.antenna.repcap_antenna_set(repcap.Antenna.Nr1)

SCPI Command :

CONFigure:WLAN:MEASurement<Instance>:RFSettings:ANTenna<n>

class AntennaCls[source]

Antenna commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: Antenna, default value after init: Antenna.Nr1

class GetStruct[source]

Response structure. Fields:

Connector_Smimo: enums.ConnectorSwitch: No parameter help available
Connector_Tmimo: enums.RxConnector: No parameter help available
Ext_Att: float: numeric External attenuation component for antenna n Range: 50 dB to 90 dB , Unit: dB
Enp: float: numeric Expected nominal power for antenna n. It can be calculated as follows: Range (Expected Nominal Power) = Range (Input Power) + External Attenuation - User Margin The input power range is stated in the data sheet. Unit: dBm

get(antenna=Antenna.Default) → GetStruct[source]

# SCPI: CONFigure:WLAN:MEASurement<Instance>:RFSettings:ANTenna<n>
value: GetStruct = driver.configure.rfSettings.antenna.get(antenna = repcap.Antenna.Default)

Assigns an RF input connector and optionally an external attenuation and expected nominal power to antenna <n>. The command is relevant for true MIMO and for 80+80 MHz signals with a separate antenna per segment. For 80+80 MHz signals, the antenna numbering continues for the second segment. Example: Two antennas per segment. Segment 0 uses antenna 1 and 2. Segment 1 uses antenna 3 and 4.

param antenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Antenna’)

return:

structure: for return value, see the help for GetStruct structure arguments.

set(connector_all: str, ext_att: float = None, enp: float = None, antenna=Antenna.Default) → None[source]

# SCPI: CONFigure:WLAN:MEASurement<Instance>:RFSettings:ANTenna<n>
driver.configure.rfSettings.antenna.set(connector_all = rawAbc, ext_att = 1.0, enp = 1.0, antenna = repcap.Antenna.Default)

Assigns an RF input connector and optionally an external attenuation and expected nominal power to antenna <n>. The command is relevant for true MIMO and for 80+80 MHz signals with a separate antenna per segment. For 80+80 MHz signals, the antenna numbering continues for the second segment. Example: Two antennas per segment. Segment 0 uses antenna 1 and 2. Segment 1 uses antenna 3 and 4.

param connector_all:

1..8 Antenna For 80+80 MHz signals, limited to maximum 2 antennas: one antenna per segment. For true MIMO with R&S CMW500/2xx, limited to maximum 2 antennas

param ext_att:

numeric External attenuation component for antenna n Range: 50 dB to 90 dB , Unit: dB

param enp:

numeric Expected nominal power for antenna n. It can be calculated as follows: Range (Expected Nominal Power) = Range (Input Power) + External Attenuation - User Margin The input power range is stated in the data sheet. Unit: dBm

param antenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Antenna’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.rfSettings.antenna.clone()