Current
SCPI Commands :
READ:WLAN:MEASurement<Instance>:MEValuation:MODulation:DSSS:CURRent
FETCh:WLAN:MEASurement<Instance>:MEValuation:MODulation:DSSS:CURRent
CALCulate:WLAN:MEASurement<Instance>:MEValuation:MODulation:DSSS:CURRent
- class CurrentCls[source]
Current commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Mod_Type: enums.ResultStatus2: DBPSk1 | DQPSk2 | CCK5 | CCK11 DBPSk1: 1 Mbps DBPSK DQPSk2: 2 Mbps DQPSK CCK5: 5.5 Mbps CCK CCK11: 11 Mbps CCK
Plcp_Type: enums.ResultStatus2: SHORtplcp | LONGplcp Short or long PLCP
Payload_Length: enums.ResultStatus2: decimal Range: 1 byte to 4095 bytes, Unit: byte
Burst_Power: enums.ResultStatus2: float Range: -100 dBm to 30 dBm, Unit: dBm
Evm_Peak: enums.ResultStatus2: float Error vector magnitude peak value Range: 0 % to 100 %, Unit: %
Evm: enums.ResultStatus2: float Error vector magnitude RMS value Range: 0 % to 100 %, Unit: %
Freq_Error: enums.ResultStatus2: float Center frequency error Range: -150 MHz to 150 MHz Hz
Clock_Error: enums.ResultStatus2: float Chip clock error Range: -125 ppm to 125 ppm, Unit: ppm
Iq_Offset: enums.ResultStatus2: float Range: -100 dB to 0 dB, Unit: dB
Gain_Imbalance: enums.ResultStatus2: float Gain imbalance Range: -100 dB to 100 dB, Unit: dB
Quad_Error: enums.ResultStatus2: float Quadrature error Range: -180 deg to 180 deg, Unit: deg
Out_Of_Tol: enums.ResultStatus2: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Range: 0 % to 100 % , Unit: %
Burst_Rate: enums.ResultStatus2: float If a modulation filter is used, the burst rate indicates the share of bursts of the selected modulation type in the bursts received. Otherwise, it returns 1. See [CMDLINKRESOLVED Configure.Isignal#Modfilter CMDLINKRESOLVED]. Unit: %
- class FetchStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Mod_Type: enums.ModulationTypeC: DBPSk1 | DQPSk2 | CCK5 | CCK11 DBPSk1: 1 Mbps DBPSK DQPSk2: 2 Mbps DQPSK CCK5: 5.5 Mbps CCK CCK11: 11 Mbps CCK
Plcp_Type: enums.PlcpType: SHORtplcp | LONGplcp Short or long PLCP
Payload_Length: float: decimal Range: 1 byte to 4095 bytes, Unit: byte
Burst_Power: float: float Range: -100 dBm to 30 dBm, Unit: dBm
Evm_Peak: float: float Error vector magnitude peak value Range: 0 % to 100 %, Unit: %
Evm: float: float Error vector magnitude RMS value Range: 0 % to 100 %, Unit: %
Freq_Error: float: float Center frequency error Range: -150 MHz to 150 MHz Hz
Clock_Error: float: float Chip clock error Range: -125 ppm to 125 ppm, Unit: ppm
Iq_Offset: float: float Range: -100 dB to 0 dB, Unit: dB
Gain_Imbalance: float: float Gain imbalance Range: -100 dB to 100 dB, Unit: dB
Quad_Error: float: float Quadrature error Range: -180 deg to 180 deg, Unit: deg
Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Range: 0 % to 100 % , Unit: %
Burst_Rate: float: float If a modulation filter is used, the burst rate indicates the share of bursts of the selected modulation type in the bursts received. Otherwise, it returns 1. See [CMDLINKRESOLVED Configure.Isignal#Modfilter CMDLINKRESOLVED]. Unit: %
- class ReadStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Mod_Type: enums.ModulationTypeC: DBPSk1 | DQPSk2 | CCK5 | CCK11 DBPSk1: 1 Mbps DBPSK DQPSk2: 2 Mbps DQPSK CCK5: 5.5 Mbps CCK CCK11: 11 Mbps CCK
Plcp_Type: enums.PlcpType: SHORtplcp | LONGplcp Short or long PLCP
Payload_Length: int: decimal Range: 1 byte to 4095 bytes, Unit: byte
Burst_Power: float: float Range: -100 dBm to 30 dBm, Unit: dBm
Evm_Peak: float: float Error vector magnitude peak value Range: 0 % to 100 %, Unit: %
Evm: float: float Error vector magnitude RMS value Range: 0 % to 100 %, Unit: %
Freq_Error: float: float Center frequency error Range: -150 MHz to 150 MHz Hz
Clock_Error: float: float Chip clock error Range: -125 ppm to 125 ppm, Unit: ppm
Iq_Offset: float: float Range: -100 dB to 0 dB, Unit: dB
Gain_Imbalance: float: float Gain imbalance Range: -100 dB to 100 dB, Unit: dB
Quad_Error: float: float Quadrature error Range: -180 deg to 180 deg, Unit: deg
Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Range: 0 % to 100 % , Unit: %
Burst_Rate: float: float If a modulation filter is used, the burst rate indicates the share of bursts of the selected modulation type in the bursts received. Otherwise, it returns 1. See [CMDLINKRESOLVED Configure.Isignal#Modfilter CMDLINKRESOLVED]. Unit: %
- calculate() CalculateStruct [source]
# SCPI: CALCulate:WLAN:MEASurement<Instance>:MEValuation:MODulation:DSSS:CURRent value: CalculateStruct = driver.multiEval.modulation.dsss.current.calculate()
Return the current, average, minimum, maximum and standard deviation single value results for DSSS signals. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() FetchStruct [source]
# SCPI: FETCh:WLAN:MEASurement<Instance>:MEValuation:MODulation:DSSS:CURRent value: FetchStruct = driver.multiEval.modulation.dsss.current.fetch()
Return the current, average, minimum, maximum and standard deviation single value results for DSSS signals. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for FetchStruct structure arguments.
- read() ReadStruct [source]
# SCPI: READ:WLAN:MEASurement<Instance>:MEValuation:MODulation:DSSS:CURRent value: ReadStruct = driver.multiEval.modulation.dsss.current.read()
Return the current, average, minimum, maximum and standard deviation single value results for DSSS signals. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ReadStruct structure arguments.