Current

SCPI Commands :

READ:WLAN:MEASurement<Instance>:MEValuation:PVTime:TERRor:CURRent
FETCh:WLAN:MEASurement<Instance>:MEValuation:PVTime:TERRor:CURRent
CALCulate:WLAN:MEASurement<Instance>:MEValuation:PVTime:TERRor:CURRent

class CurrentCls[source]

Current commands group definition. 3 total commands, 0 Subgroups, 3 group commands

calculate() → ResultStatus2[source]

# SCPI: CALCulate:WLAN:MEASurement<Instance>:MEValuation:PVTime:TERRor:CURRent
value: enums.ResultStatus2 = driver.multiEval.powerVsTime.terror.current.calculate()

Return the current, average, minimum, maximum and standard deviation timing error single value results of the power vs time measurement. The commands are only supported for OFDM standards. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwWlanMeas.reliability.last_value to read the updated reliability indicator.

return:

timing_error_curr: float Unit: s

fetch() → float[source]

# SCPI: FETCh:WLAN:MEASurement<Instance>:MEValuation:PVTime:TERRor:CURRent
value: float = driver.multiEval.powerVsTime.terror.current.fetch()

Return the current, average, minimum, maximum and standard deviation timing error single value results of the power vs time measurement. The commands are only supported for OFDM standards. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwWlanMeas.reliability.last_value to read the updated reliability indicator.

return:

timing_error_curr: float Unit: s

read() → float[source]

# SCPI: READ:WLAN:MEASurement<Instance>:MEValuation:PVTime:TERRor:CURRent
value: float = driver.multiEval.powerVsTime.terror.current.read()

Return the current, average, minimum, maximum and standard deviation timing error single value results of the power vs time measurement. The commands are only supported for OFDM standards. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwWlanMeas.reliability.last_value to read the updated reliability indicator.

return:

timing_error_curr: float Unit: s