Average

SCPI Commands :

READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
CALCulate:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

calculate(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) List[ResultStatus2][source]
# SCPI: CALCulate:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
value: List[enums.ResultStatus2] = driver.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.acarrier.average.calculate(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces over all carriers (complete FFTSize) for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwWlanMeas.reliability.last_value to read the updated reliability indicator.

param start:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param count:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param decimation:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

sflat_all_carr_tx: float Comma-separated list of power levels, one value per subcarrier (including data, pilot and unused subcarriers) The number of power levels depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’. Unit: dB

fetch(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) List[float][source]
# SCPI: FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
value: List[float] = driver.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.acarrier.average.fetch(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces over all carriers (complete FFTSize) for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwWlanMeas.reliability.last_value to read the updated reliability indicator.

param start:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param count:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param decimation:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

sflat_all_carr_tx: float Comma-separated list of power levels, one value per subcarrier (including data, pilot and unused subcarriers) The number of power levels depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’. Unit: dB

read(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) List[float][source]
# SCPI: READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
value: List[float] = driver.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.acarrier.average.read(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces over all carriers (complete FFTSize) for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Use RsCmwWlanMeas.reliability.last_value to read the updated reliability indicator.

param start:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param count:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param decimation:

numeric For the optional query parameters start, count and decimation, see ‘Trace sub-arrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

sflat_all_carr_tx: float Comma-separated list of power levels, one value per subcarrier (including data, pilot and unused subcarriers) The number of power levels depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’. Unit: dB