Maximum
SCPI Commands :
READ:WLAN:MEASurement<Instance>:MEValuation:TSMask:MIMO<n>:SEGMents:MAXimum
FETCh:WLAN:MEASurement<Instance>:MEValuation:TSMask:MIMO<n>:SEGMents:MAXimum
CALCulate:WLAN:MEASurement<Instance>:MEValuation:TSMask:MIMO<n>:SEGMents:MAXimum
- class MaximumCls[source]
Maximum commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Out_Of_Tol_Seg_1: enums.ResultStatus2: float Out of tolerance result, segment 1 Range: 0 % to 100 % , Unit: %
Out_Of_Tol_Seg_2: enums.ResultStatus2: float Out of tolerance result, segment 2 Range: 0 % to 100 % , Unit: %
Margin_Seg_1_Tx: List[enums.ResultStatus2]: No parameter help available
Margin_Seg_2_Tx: List[enums.ResultStatus2]: No parameter help available
- class ResultData[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Out_Of_Tol_Seg_1: float: float Out of tolerance result, segment 1 Range: 0 % to 100 % , Unit: %
Out_Of_Tol_Seg_2: float: float Out of tolerance result, segment 2 Range: 0 % to 100 % , Unit: %
Margin_Seg_1_Tx: List[float]: No parameter help available
Margin_Seg_2_Tx: List[float]: No parameter help available
- calculate(mimo=Mimo.Default) CalculateStruct [source]
# SCPI: CALCulate:WLAN:MEASurement<Instance>:MEValuation:TSMask:MIMO<n>:SEGMents:MAXimum value: CalculateStruct = driver.multiEval.tsMask.mimo.segments.maximum.calculate(mimo = repcap.Mimo.Default)
Return the limit line margin values of the transmit spectrum mask for MIMO measurements, antenna <n>, bandwidths with two segments. Margins for the current, average, minimum and maximum traces are returned. A positive result indicates that the trace is located above the limit line. The limit is exceeded. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- param mimo:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mimo’)
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch(mimo=Mimo.Default) ResultData [source]
# SCPI: FETCh:WLAN:MEASurement<Instance>:MEValuation:TSMask:MIMO<n>:SEGMents:MAXimum value: ResultData = driver.multiEval.tsMask.mimo.segments.maximum.fetch(mimo = repcap.Mimo.Default)
Return the limit line margin values of the transmit spectrum mask for MIMO measurements, antenna <n>, bandwidths with two segments. Margins for the current, average, minimum and maximum traces are returned. A positive result indicates that the trace is located above the limit line. The limit is exceeded. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- param mimo:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mimo’)
- return:
structure: for return value, see the help for ResultData structure arguments.
- read(mimo=Mimo.Default) ResultData [source]
# SCPI: READ:WLAN:MEASurement<Instance>:MEValuation:TSMask:MIMO<n>:SEGMents:MAXimum value: ResultData = driver.multiEval.tsMask.mimo.segments.maximum.read(mimo = repcap.Mimo.Default)
Return the limit line margin values of the transmit spectrum mask for MIMO measurements, antenna <n>, bandwidths with two segments. Margins for the current, average, minimum and maximum traces are returned. A positive result indicates that the trace is located above the limit line. The limit is exceeded. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- param mimo:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mimo’)
- return:
structure: for return value, see the help for ResultData structure arguments.